Coming Soon Terrix Spray Plaster
Terrix Plasters is ready-to-use plaster coat for machine levelling of interior walls and ceilings. For final levelling and smoothing of surfaces before painting. Its white colour and smooth surface allow for a reduction in the number of coats necessary to obtain a full decorative effect. When set and hardened, very easy for sanding. Suitable for use on all typical mineral surfaces (such as concrete, cement, limestone, lime and gypsum plasters and plaster boards). Due to its chemical formulation, the product dries even when higher relative humidity levels occur.
Benefits to the customer:
- Higher productivity outputs - up to 500m2/man/day
- Due to the full vapour permeability of the Terrix® spray plaster there is no need to wait for taping and jointing to be fully dry - the product can be applied on the same day.
- Chemical bonding - the product is permanently connected to the substrate. There is no risk of cracking or flaking.
- Chemical accelerated set - the product is less sensitive to weather conditions meaning Terrix® spray plaster is ready for painting usually next day, in extreme situations after 3 days. Traditional skim coats and competitor’s spray coats during winter conditions needs up to two weeks to be ready for painting.
- Very clean application process - spray plaster is premixed and does not required water or mixing on site. Additionally there is almost no overspray which means very little cleaning after application.
- The quality of the finish is much better than standard skim coat plastering or other systems. It is delivering a very smooth, decorative surface quality not achievable with skim coat plastering.
- The Terrix® Spray Plaster is fully compatible with Terrix® premium dispersion silicate paint.
- The chemical formulation of the product and its application prosperities allow for more consistent finish leading to very little snagging.
- Health and safety benefits:
- Less operatives on site leading to reduced risk of accidents.
- Reduced risk of falling from heights - ability to spray up to 3m without scaffolding.
- Very clean application process - spray plaster is premixed and does not required water or mixing on site. Additionally there is almost no overspray which means very little cleaning after application.
- Reduced dust risk on site. If Terrix® Self-levelling spray plaster is used, no sanding is required.
Benefits to the applicator (subcontractor):
- Lower labour cost due to the increased output. Up to 500m2/man/day.
- Ready to use - no mixing or water on site required.
- Less skilled labour required due to the ease of application. Terrix® spray plaster is extremely easy for spraying, wiping and sanding.
- Minimising days on site - Due to the products permeability and partly chemical set capabilities the work process can be accelerated, in return releasing the areas ahead of program for others trades.
- Highly reduced snagging due to consistent finish.
- Easy sanding - for initial 20 days after application the product is very easy for sanding.
- Silk consistency - very little snagging after application.
- Chemical accelerated set - ready for painting usually next day, in extreme situations after 3 days.
See the spray plaster in action here
Register your interest by contact us here